Dansensor® Lippke® 5000 EN User Guide 9
P/N 380419-C
05/2022
General description
The Dansensor® Lippke® 5000 is an integrated package test system that measures the seal
strength and integrity of flexible, rigid or semi-rigid packages. The seal strength and integrity
of the package is measured by inflating it using compressed air.
The system consists of a console and one or more accessory kits, each of which is used to test
the most commonly used types of packages such as closed packages, open packages, screw
top tubes, and IV bags - see
"Accessories" on page 13 for details.
Fig. 1. Dansensor® Lippke® 5000 Package Test System
On stand-alone models setting up and testing is done using the display on the instrument
whereas the PC-enabled models use a PC-based software application.
The entry, selection and management of all test parameters is easily and quickly
accomplished and multiple test configurations can easily be created and recalled.
Test Capabilities
The system can perform a variety of seal strength and package integrity tests.
See "2. Tests" on page 37 for detailed descriptions of each test procedure.
To Next Page
Loading...