Dansensor® Lippke® 5000 EN User Guide 111
P/N 380419-C
05/2022
Test & Adjustments
The Test & Adjustments functions can be used to perform various tests.
System Leak Test Opens the System Leak Test screen.
See "System Leak Test" on page 112 for details.
0 adjusting Pressure Sensors Calibrates the zero point of the pressure sensors in relation
to the ambient atmospheric pressure.
When selected the following message appears:
Disconnect hoses from the “FEED” and “SENSE” connectors,
then press
to continue.
When calibration is completed, the following message is
displayed:
Press .
Adjustments Only available for Service Technicians.
To Next Page
Loading...
