Mod Con 300 - Page 26

PART 6: VENTING, COMBUSTION AIR & CONDENSATE REMOVAL (CONTINUED)
GAS-FIRED BOILER Boiler Manual
25
Table 6-1
**Note: IPEX is an approved
*Note: Cellular Foam Core Pipe must only Manufacturer in Canada
be used on INTAKE piping. supplying vent material listed to
ULC-S636
Table 6-2
**Note: IPEX is an approved
*Note: Cellular Foam Core Pipe must only Manufacturer in Canada
be used on INTAKE piping. supplying vent material listed to
ULC-S636
Table 6-3
**Note: IPEX is an approved
Manufacturer in Canada
supplying vent material listed to
ULC-S636
Table 6-4
Table 6-5
Table 6-6
Table 6-7
Mod Con 300 & 500 HTP PART NUMBER
Boiler Adapter 4" 7250P-732
Horizontal Vent Terminal 4" 7350P-607
Rain Cap 4" 7350P-609
Mod Con 850 HTP PART NUMBER
Boiler Adapter 6" 7350P-114
Horizontal Vent Terminal 4" 7350P-608
Rain Cap 6" 7350P-610
APPROVED STAINLESS STEEL VENT ADAPTERS AND TERMINATIONS
2SVSMK04
2SVSRTF04
Z-FLEX PART NUMBER
2SVSRCF04
2SVEP06.5
2SVSRTX06
2SVSRCF06
Z-FLEX PART NUMBER
APPROVED METALLIC INTAKE VENTING MATERIAL
"B" GAS VENT U.L. LISTED U.L. LISTED
GALVANIZED U.L. LISTED U.L. LISTED
MATERIAL STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
ANSI /ASTM D1785 ULC S636**
AL294C U.L.LISTED U.L.LISTED
Cements and Primers
APPROVED PIPE CEMENT AND PRIMER FOR PLASTIC PIPE
IPEX System 636
ANSI/ASTM D2564
ANSI/ASTM F493
APPROVED METALLIC EXHAUST VENTING MATERIAL
PVC
CPVC
MATERIAL STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
ANSI /ASTM D1785PVC SCHEDULE 40 ULC S636**
PVC -DWV
STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
APPROVED PLASTIC CONDENSATE PIPING MATERIAL
MATERIAL STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
PVC SCHEDULE 40
APPROVED PLASTIC EXHAUST VENTING MATERIAL
STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
MATERIAL
CPVC SCHEDULE 40
ANSI /ASTM D2665
ANSI /ASTM F441
ULC-S636**
ULC- S636**
CEMENT AND PRIMER
MATERIAL
APPROVED PLASTIC INTAKE VENTING MATERIAL
MATERIAL
STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
ULC S636**PVC SCHEDULE 40 ANSI /ASTM D1785
PVC DWV ANSI /ASTM D2665 N/A
PVC-CELLULAR FOAM CORE* U.L. LISTED N/A
CPVC SCHEDULE 40 ANSI /ASTM F441 ULC- S636**