Copyright© 2018 Mod-U-Blast®, All Rights Reserved
Horizontal Filter Dust Collector Owner’s Manual
11
Filter Removal and Installation
Be sure to use proper safety and protective equipment when removing the dust contaminants
and dirty filters.
Turn off electrical power source and lock out before performing service or maintenance.
Turn off compressed air supply and bleed the dust collector storage tank before performing
service or maintenance.
Start by removing the top row of filters first and replace. This will limit the amount of dust during
replacement.
Do not operate the dust collector with missing or damaged filters.
Remove the knob by turning counter clockwise
While removing the knob hold the lter lid in place until fully unscrewed and remove
the lid.
To Next Page
Loading...