Mod 102 - Table of Contents

2
TABLE OF CONTENTS
TOOL LIST …………………………………………………………………………...3
PARTS LIST …………………………………………………………………………...4
SAFETY …………………………………………………………………………...5
SOLDERING TIPS …………………………………………………………………...6
WIRING TIPS ……………………………………………...................................7
HARDWARE FASTENING TIP …………………………………………………...8
STEP BY STEP ASSEMBLY INSTRUCTIONS …………………………………...8
Section 1 - Mounting of Top Components …………………………………...8
Section 2 - Mounting of Front Components ………………………………….10
Section 3 - Mounting of Rear Components …………………………………..11
Section 4 - Mounting Internal Terminal Strips and Passive Components …….11
Section 5 - Connect Front Mounted Components …………………………….14
Section 6 - Connect Rear Mounted Components …………………………….14
Section 7 - Finish Connecting the Transformer and Power Supply Wires ……15
Section 8 - Connect the Tube Filament Wiring ……………………………….15
Section 9 - Finishing Up……………………………………………………… 16
Label Mounting Instructions ………………………………………………...17
PARTS LIST DRAWINGS
(4)
There are four parts list drawings separated from these instructions to help you find and
identify each part.
ASSEMBLY DRAWINGS
(9)
There are 9 assembly drawings and one Primary Wiring Diagrams page separated from
these instructions to help you with each step of the assembly.