EN
7
undergoes technical
and aesthetic changes,
changes in performance
and characteristics, and in
general is tampered with in
one or more of its constituent
components.
• The machine should be
placed on a at counter
and must be placed in
settings with the following
temperatures:
Minimum room temperature:
5°C/41°F;
Maximum room temperature:
32°C/89°F.
• The weighted sound
pressure level of the machine
is lower than 70dBA.
CAUTION – Risk of re and
electric shock. Replace only
with manufacturer’s cord set,
part No. E-0118-01
Product Handling and
Transportation
Modbar equipment is
shipped in factory approved
packaging. Upon receipt
of equipment, thoroughly
inspect the packaging
for damage. If damage is
suspected, contact Modbar
immediately.
In the event that equipment
needs to be returned to
Modbar, or shipped for any
reason, it should be shipped
in the factory approved
packaging. If you have
discarded the packaging,
please contact Modbar for
replacements.
The equipment must be
properly drained prior to
shipment, to avoid damage
from freezing. If you have
questions about how to
properly drain equipment
for shipping, please contact
Modbar support.
Do not store the equipment
in places where temperature
may cause water in the boilers
to freeze.
A [mm]
B [mm]
C [mm]
WEIGHT
Module
[kg]
Dimensions and weights common to all
machines
A
C
B
D
E
F
421
16
136
406
D [mm]
E [mm]
F [mm]
296
137
137
WEIGHT
Tap
[kg]
11,3
To Next Page
Loading...
