Modecom FreeWAY MX - Connecting to Your PC; Using Mass Storage Device; Using MS ActiveSync software

21
PERSONAL NAVIGATION DEVICE
III Connecting to Your PC
The USB cable is provided for system upgrades. This USB cable will work on the PC either
with Microsoft ActiveSync® or as a Mass Storage Device.
For upgrade and more information about Microsoft ActiveSync®, please visit Microsoft
website. www.microsoft.com
Two ways to update or change the maps, the software, the multi-media  les to your de-
vice.
1. Using Mass Storage Device
1.1 Set “Mass Storage” mode in FreeWAY MX. To  nd it, in the Main Menu go into System/
System Info/USB.
1.2 FreeWAY MS will reset automatically.
1.3 Connect the device and PC via USB cable.
1.4 Device will be shown as Mass Storage Device.
1.5 Copy the  les to the correct  le path on your SD.
1.4 The device will show you the contents of the SD/SDHC card.
2. Using MS ActiveSync® software
2.1 Set up the MS ActiveSync® on the PC.
2.2 Set “MS ActiveSync” mode in FreeWAY MX. In the Main Menu go into System/System
Info/USB.