EasyManua.ls Logo

Modecom FreeWAY MX - Charging by Car Charger; Install the Car Mount System; Main function introduction; Starting up

Modecom FreeWAY MX
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.modecom.eu
6
PERSONAL NAVIGATION DEVICE
- Plug the adapters DC port into the devices USB port on its right-side panel
- Plug the adapter into the main supply socket.
- The charging indicator will light. When the unit is fully charged, the red indicator will
turn green.
2.2 Charging by Car Charger
The car charger supplies power to your device
when you are using the device in a car.
Caution: To protect your device against sud-
den surges in current, connect the car charger
only after the car engine has been started.
Plug the car chargers USB plug into the USB
port of the FreeWAY MX and the other end into the car’s cigarette lighter.
2.3 Install the Car Mount System
Take o the protected  lm on the bottom of
the suction mount, then choose a right pla-
ce on the windscreen or side window. Make
sure that the area where the suction mount
will be  xed is clear. Caution: Never place the
stand where the drivers  eld of vision is
blocked.
II. Main function introduction
1. Starting up
Press the Power button to power on the device, then you will enter into the Main Manu
interface.

Table of Contents

Related product manuals