EasyManua.ls Logo

Modecom FreeWAY MX - Troubleshooting and Maintenance; Resetting Your System; Power Problems; Screen Problems

Modecom FreeWAY MX
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
PERSONAL NAVIGATION DEVICE
can burst or explode, releasing hazardous chemicals. To reduce the risk of  re or burns, do
not disassemble, crush, puncture, or dispose of in  re or water.
Important instructions (for service personnel only)
- Replace only with the same or equivalent type recommended by the manufacturer.
- The battery must be recycled or disposed of properly.
- Use the battery only in the speci ed equipment.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used bat-
teries according to the instructions.
V Troubleshooting and Maintenance
1.1 Resetting Your System
Resetting your system is similar to restarting your computer. Occasionally, you may need
to reset your device. For example, you should reset your system when it stops responding
or appears to be “frozen or “locked up. To reset your system, press the Reset button on
left side of your device.
1.2 Power Problems
Power does not turn on when using battery power
- The remaining battery power may be too low to run your device.
- Connect the AC adapter to your device and to AC power or Connect the Car Charger to
your device and to external DC power.
1.3 Screen Problems
A) Screen is o
If the screen does not respond even after you press the power button, try the following in
order until the problem is solved:
- Connect the AC adapter to your device and to external AC power.

Table of Contents

Related product manuals