Modena WP 600 - Understanding Error Codes

English 41
ERROR CODE
When there is a malfunction that is not appropriate, then the screen monitor of the unit will display
error code as a warning.
Code
Description
Possible Causes
LED1, LED2 blinking
Door open
Door open when the machine
operate
LED1, LED4 blinking
The water channel enter
Incoming water line is not
working
LED1, LED5 blinking
Sewer water
Drainage is not functioning
LED1, LED6 blinking
Temperature sensor
Temperature sensor is not
functioning
LED2, LED3 blinking
Overflowing / leaking
Overflow occurs
LED2, LED4 blinking
Water leaks
Water leak
LED2, LED5 blinking
Telecommunications
Abnormal communication
transmission
LED2, LED6 blinking
Heating element
Heating is not normal
LED3, LED4 blinking
Dry-fire
Heating element burned
WARNING !
If overflow occurs, turn off the water supply source before contacting the service center. If
there is water at the bottom of filling unit due to excess or slightly overflowed, the water
must be removed / dried before restarting the machine.