Modena WP 600 - Part 7: Specification; WP 600 Model Specifications

English 44
Problem
Possible Cause
Solution
Steam
This is a normal event
The vapor may arise due to the fan through
the door latch during drying and empty /
draining the water.
Black or gray spots
on the plate.
The aluminum tableware is
rubbing the plate.
Use a gentle cleanser to remove the sign.
Stagnant water from
the bottom of the
tube
This is a normal occurrence
A little clean water around the outlet tube is
normal to lubricate the seals.
An overflow on the
machine
Put too many cutlery in the
dishwasher or the rinse aid
spilled
Be careful not to fill the rinse aid excess.
The spill of rinse aid can cause foam and
easy excess to overflow. Wipe the spills with
a damp cloth.
Leveling of the machine has
not been set.
Make sure the machine has adjustable the
height and in a stable position and flat.
DISHWASHER
WP 600
Types
Freestanding
Washing capacity
12 place settings.
Color
Stainless (S)
Material from outside cabinet
Metal
Material from the cabinet
Stainless
Water overflow protection
Ya
Number of programs
6
Water pressure (Mpa)
0.04-1
Maximum washing temperature (Celsius)
60
o
Normal washing time (minutes)
153
Light wash program
Ya
Delay start (hours)
3/6/9
The height of the legs is adjustable
Ya
The height of the baskets is adjustable
Ya
Water consumption (liter)
14
Maximum electrical power (Watt)
1850
Voltage (Volt)
220-240 V 50 Hz
Product dimensions (L x W x H) cm
60 x 60 x 85
Weight (Kg
44
S = Stainless W = White B = Brown V = Silver G = Gray L = Black R = Mirror
Specifications of this appliance may change without notice to improve the quality of the product. Figures in this
manual are schematic and may not match your product exactly. Values stated on the machine labels or in the
documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending
on operational and environmental conditions of the appliance, values may vary.
Part 7 : Specification