F
Manual Mini Blizzard Pro
22 www.modster.at
Problem Possible Cause Solution
The drone
does not respond
1. the battery is empty 1. charge the battery
2. The remote control battery is low and
the voltage indicator is ashing
2. replace the
Remote control battery
3. the binding process between
and the drone was not successful
3. perform the binding process again
again
The drone reacts
inaccurately to
control
1. The battery of the remote control is
weak or of poor quality
1. Replace the old battery with a new
one
2. another remote control or WLAN inter-
feres with the transmission
2. change the ight area
The drone drifts
sideways while
hovering
1. No horizontal position correction 1. Remote Control and perform the
calibration again.
Problem solving
Precautions
1. If the remote control batteries are weak, the range and transmission quality will be poor.
2. Be careful when the drone is powered on - if it malfunctions, the motors may start and cause injury or
damage.
3. Do not y with a damaged drone - repair the unit before the next ight. Otherwise, injury or damage
may occur.
4. Remove the batteries from the remote control after operation.
5. Do not drop the remote control
Spare Parts
Here you can nd available spare parts for the drone:
Propeller Set
294781
Battery
294782
Motor set
294783 CW A
294784 CCW B
To Next Page
Loading...