AFTER REPLACING A GAS SYSTEM COMPONENT, CHECK FOR GAS LEAKS AT
CONNECTION POINTS.
DISCONNECT THE APPLIANCE ELECTRIC SUPPLY, IF PRESENT, BEFORE CARRYING OUT
ANY OPERATION.
AFTER REPLACING AN ELECTRICAL SYSTEM COMPONENT, CHECK IT IS CORRECTLY
WIRED.
ELECTRIC OVEN
SOSTITUTION OF THE LAMP
Remove and replace the component.
Reassemble all parts. For assembly, proceed in reverse order.
SOSTITUTION OF THE ELECTRICAL COMPONENTS
Remove and replace the compon
Reassemble all parts. For assembly, proceed in reverse order.
REPLACING THE HEATING ELEMENT
Remove the interior panel
Remove the water distributor
Undo the screw securing the element to the oven and pull the el
Reassemble all parts. For assembly, proceed in reverse order.
13. CLEANING THE INTERIOR
Check the condition of the inside of the appliance.
Check and clean the fumes exhaust system.
14. MAIN COMPONENTS
PROGRAMMABLE ELECTRIC OVEN
To Next Page
Loading...