- 18 -
1. Place the mower in the station (or press HOME button for 3 seconds)
2. Mower will charge up to 100% and then go into standby.
3. Mower will get charged again if battery is lower than 75%.
The mower charges on its station through the two charging rods. These insert into the
front of the mower. Ensure the holes are free of debris or obstructions and that the mower
aligns when approaching the charge station. Uneven ground on approach can cause the
mower to not make a positive connection first time. If this happens consider levelling the
ground or moving the station to a more suitable area.
Schedule
1. Press OK button to enter sub-menu 1.
2. Select ‘schedule’.
3. Press OK button to select the desired day.
4. Press UP, DOWN, LEFT and RIGHT buttons to set the start and end time.
5. Press OK button to confirm the daily setting.
6. Repeat step 3 to 5 to complete the weekly plan.
7. Press OK button to confirm the weekly setting.
This allows you to change mowing schedules for dierent days of the week, for example if
you want to prevent mowing to occur on any given day or if other scheduled activity in
the garden would prevent eective mowing during normal daily schedule.
Charging