To Next PageTo Next PageWhat to do if electricity is out when using AC adapter only for Moen MOTIONSENSE 7622EWBG?
If your Moen Kitchen & Bath Fixtures faucet isn't working because of a power outage when using the AC adapter, you can temporarily use the battery holder that came with the faucet. The faucet will then work as usual until the batteries run out.
What to do if batteries are not installed properly in Moen Kitchen & Bath Fixtures?
If the batteries are not installed properly in your Moen Kitchen & Bath Fixtures, unplug the battery holder cable and install the batteries in the correct orientation into the battery holder.
What to do if data cable is not plugged into control box all the way in Moen Kitchen & Bath Fixtures?
If the data cable of your Moen Kitchen & Bath Fixtures is not fully plugged into the control box, firmly push the data cable into the control box.
What to do if power cable is not plugged into control box all the way in Moen MOTIONSENSE 7622EWBG?
If the power cable of your Moen Kitchen & Bath Fixtures is not completely plugged into the control box, make sure to push the power cable firmly into the control box.
General| Model Number | 7622EWBG |
|---|---|
| Brand | Moen |
| Product Line | MOTIONSENSE |
| Finish | Brushed Gold |
| Type | Touchless Kitchen Faucet |
| Spout Height | 15.5 inches |
| Flow Rate | 1.5 GPM |
| Handle(s) | Single Handle |
| Handle Type | Lever |
| Number of Handles | 1 |
| Installation | Deck Mount |
| Number of Holes Required | 1 |
| Warranty | Limited Lifetime |
| Power Source | Battery |
| Spray Type | Stream and Spray |
| Sensor Type | Infrared Sensor |
For installation help and replacement parts.
Useful tools, model number recording, and online product registration.
Warnings and tips for removing the old faucet safely.
Explanation of symbols used throughout the manual.
Visual guides for various control box placement scenarios.
Advice on fitting and placement for serviceability and clearance.
Installing the faucet body with deck plate options.
Installing the mounting washer and nut to secure the faucet.
Connecting the pulldown hose and spray wand.
Connecting the pulldown hose and data cable to the control box.
Attaching the control box and connecting hot/cold water lines.
Attaching hose weight and preparing battery holder.
Methods for attaching the battery holder to the wall.
Inserting battery cable and turning on water supply.
Testing the faucet handle and wave sensor functionality.
Methods to enable or disable the wave sensor.
Steps to address low water flow by cleaning filters.
Reinstalling filters and checking for leaks after supply line connection.
Steps to resolve irregular flow by cleaning the screen.
Actions for no water flow or light status problems.
Troubleshooting low flow, sensor not working, or reversed handle positions.
Fixing problems where the faucet does not turn off.
Statement regarding FCC rules and potential interference.
Details of the product's limited lifetime warranty.
What the warranty does not cover and how to make a claim.
