13
Achieving Multi-Control Association (Only for N+L
Wire)
Note: Ensure that you have successfully completed the linking process outlined above to
add this switch to your MOES App before proceeding with the association.
1. Add another smart switch to the same MOES App. (If a smart switch has been
added before, proceed to the next step.)
Note: If your switch requires a neutral wire, only L and N are needed for wiring; there's no
need to wire the new switch to the light. You can then control one light with multiple
switches in the MOES App. If your switch doesn't require a neutral wire, follow the wiring
instructions to connect the L and light. At this point, you can simultaneously control the
lights with multiple switches.
2. In the app, you will now see two devices. Click the main switch (as a one-gang
switch) to proceed to the next
operation.
Recenlty added switch
Main switch
To Next Page
Loading...
Need help?
General
