Need help?Do you have a question about the Monarch Water Ultimate Series and is the answer not in the manual?
General| Brand | Monarch Water |
|---|---|
| Model | Ultimate Series |
| Category | Water Dispenser |
| Language | English |
Guidance on preparing for installation, including water bylaws and space requirements.
Instructions for correctly positioning the water softener unit, considering proximity to mains and drain.
Explains the requirement for check valves in domestic water softeners.
Details on providing a drinking water tap in compliance with UK Water Regulations.
Lists necessary materials and kits for installing the water softener.
Crucial steps for testing water pressure, including acceptable ranges and limiter recommendations.
Step-by-step guide to installing bypass valves and check valves as per diagram.
Detailed instructions for connecting inlet and outlet hoses to the softener unit.
Guidance on connecting the drain hose, including hose length, routing, and air gap requirements.
Instructions for correctly routing and terminating the overflow hose to prevent kinks.
Procedure for testing the installed system for any leaks after initial setup.
Steps for safely connecting the transformer and power supply to the softener.
How to perform a water hardness test using the provided kit.
Guide to setting the time and water hardness on the electronic controller.
Instructions for accurately setting the current time on the softener's controller.
How to input the water hardness level determined by the test kit.
Procedure for flushing the softener after installation to remove air and resin dust.
How to manually initiate an automatic regeneration cycle.
Adjusting the blender bypass for slightly blended water and understanding blue/green stains.
Recommended steps for bypassing and powering down the softener before leaving for holiday.
Information regarding recommended annual servicing for optimal performance and longevity.
To Next Page
