211 Narrow element value is less than 1 or greater than 99.
Correct the value and resend the format to the printer.
212 Wide element value is less than 1 or greater than 99.
Correct the value and resend the format to the printer.
213 Dimension must be 1 to 30 for a column or 3 to 90 for a
row on a PDF417 bar code.
214 Truncation code must be S (standard) or T (truncated
bar code).
215 Aspect code must be C (columns) or R (rows).
216 Option definition must be S (set) or T (template).
217 Input device device must be D (Default), H (Host), K
(Keyboard), N (None), or S (Scanner).
218 Pad direction must be L (from left) or R (from right).
219 Pad character is outside the range 0 to 255.
220 Check digit selection must be G to generate check digit.
221 Primary or secondary price format is outside the range
1 to 16.
222 Data type restriction is outside the range of 1 to 6.
223 Option is not valid for the field.
224 Bar code Intercharacter gap must be 0 to 99 dots.
(This is also known as the additional character gap
when using Option 50, Defining Bar Code Densities.)
251 Power up mode must be 0 (online) or 1 (offline).
252 Language selection must be 0 (English), 1 (French), 2
(German), 3 (Spanish).
253 Batch separator code must be 0 (off), 1 (on), or 2
(Double) in the System Setup Packet.
Diagnostics and Errors
8-11
To Next Page
Loading...
