254 Slash zero selection must be 0 (standard zero) or 1
(slash zero).
255 Supply type must be 0 (black mark), 1 (die cut), 2
(non-indexed), or 3 (aperture).
256 Ribbon selection must be 0 (direct), 1 (transfer) or 2
(High Energy).
257 Feed mode must be 0 (continuous) or 1 (on-demand).
258 Supply position is outside the range. See "Defining the
Supply Setup Packet" in Chapter 2 for more information.
259 Contrast adjustment must be -390 to 156 dots.
260 Print adjustment must be -99 to 99 dots.
261 Margin adjustment must be -99 to 99 dots.
262 Speed adjustment must be 0 (default), 20 (2.0 ips), 25
(2.5 ips), 40 (4.0 ips), 60 (6.0 ips), 80 (8.0 ips), or 10
(10.0 ips).
263 Primary monetary symbol is invalid. See "Defining the
Monetary Formatting Packet" in Chapter 2 for more
information.
264 Secondary symbol selection must be 0 (none) or 1
(print secondary sign).
265 Monetary decimal places must be 0 to 3.
266 Character string length in the control characters packet
must be 5 (MPCL control characters) or 7 (ENQ/IMD
command character).
267 Baud rate selection must be 0 (1200), 1 (2400), 2
(4800), 3 (9600), 4 (19200), 5 (38400), 6 (57600), or 7
(115200). Resend the communication settings packet
or check the DIP switch settings.
8-12
Diagnostics and Errors
To Next Page
Loading...
