What to do if there are problems with the Monark Ergomedic 828 E computer software?
If your Monark Exercise Bike's computer software is experiencing issues, send an email describing the problem to the software developer HUR labs support at software@hur.fi.
How to fix a clicking noise when pedaling on a Monark Ergomedic 828 E?
If you hear a clicking noise when pedaling your Monark Exercise Bike, and the noise increases with added weight, consider these potential solutions: 1. **Pedals:** Ensure the pedals are securely tightened. If the noise persists, try replacing the pedals. 2. **Crank:** Check the crank to make sure it is not loose. Tighten if necessary. 3. **Base Bearing:** If the base bearing is loose, it's recommended to contact your dealer for service.
General| Brand | Monark |
|---|---|
| Model | Ergomedic 828 E |
| Category | Exercise Bike |
| Language | English |
Controls resistance via brake belt tension.
Adjusts seat and handlebar for comfort.
Details the specifications of the ergometer's electronic meter.
Explains how to operate and interpret the ergometer's computer functions.
Details Monark's product guarantee against defects.
Guidelines for keeping the ergometer in good shape.
Advice on securing the tension device during transport.
Instructions for replacing the meter batteries.
Procedure for replacing the brake belt on the ergometer.
How to clean and maintain the brake belt contact surface.
Information on crank bearing lubrication and issues.
Information on flywheel bearing maintenance.
Guide for cleaning, tensioning, and replacing the chain.
Procedure to set the scale to zero.
Steps for performing a mechanical scale calibration.
Instructions for replacing and lubricating the freewheel sprocket.
To Next Page
