Moneris Go Plus - Terminal Hardware and Interface

Moneris Go Plus Integrated: Getting Started Guide 4
Introduction
The Moneris Go Plus is a smart solution with cloud integration intended for your point-of-sale application.
Use this guide to:
 Set up the hardware
 Configure the application and communication settings
 Synchronize the terminal with the Moneris host
 Troubleshoot if needed
Moneris Go Plus features
Key features include:
 PCI security for card entry (PCI PTS v6)
 Multiple card readers:
o integrated magnetic stripe
o integrated chip
o digital wallet
o embedded contactless reader
 Front camera (fixed focus, code scanning, 2MP)
 Rear camera (auto focus, flash, code scanning, 8MP)
 6-inch colour/capacitive multi-touch
 Thermal receipt printer
Before getting started
Make sure you have received these items:
 Hardware
 A set of Moneris test cards
Note: Not applicable for production - QA
 Account credentials for test or production including:
o Merchant ID
o Terminal ID
 Go Portal account for test or production (refer to Go Portal account creation). For National customers
please refer to your Client Consultant.