Moneris Go Plus - Connecting the Charger to the Moneris Go Plus; Connecting the Optional Charging Base to the Moneris Go Plus

Moneris Go Plus Integrated: Getting Started Guide 8
Connecting the charger to the Moneris Go Plus
1. Unfold the charging cable.
2. Insert the micro-USB connector into the USB port on the left side
of the terminal.
3. Make sure the AC adaptor is connected to the other end of the
charging cable. Plug the AC adaptor into a working electrical
outlet.
Note: Use a power bar to avoid electrical surges.
4. The terminal displays the charging screen.
a. Wait for the battery charging icon to display. This indicates
that the terminal is receiving power and the battery is
charging.
b. Continue charging the terminal during the rest of the setup
procedures.
Connecting the optional charging base to the Moneris Go Plus
5. Unfold the charging cable.