Mongoose VT900 - SMS Command Reference Guide

12
APP ICONS
‘Real time’ – shows current or last reported position
‘Historical’ – graphically shows the route taken over different time periods
‘Geofence’ – allows you to set defined areas
‘Command’ -- sets tracker parameters & commands
‘Device info’ - Details about the tracker, SIM number etc
‘Messages’ - A record of texts sent from device to you
‘Alarm setting’ - Define which alerts are required
‘Logout’ - Closes the APP
Most of the tracker functions can be controlled from within the APP under ‘
command ’ and ‘ alarm
setting
’ either by GPRS (data) or by SMS (text).
Some phone~APP combinations may not have all options given in this manual.
SMS (TEXT) COMMANDS -
Instruction
Text to send to tracker Reply
Cell phone pairing
(master user #1)
admin123456 xxxxxxxxx
(xxxxxxxx = your mobile number)
admin ok
Cancel pairing
noadmin123456 xxxxxxxxx
noadmin ok
SOS Alerts (2 numbers)
Cancel SOS
Check SOS numbers
SOS, XXXXXXXX
SOS, XXXXXXXX
SOS,,
SOS
SOS! S1:XXXXXXXX
SOS! S2:XXXXXXXX
SOS Alarm: Call & SMS
Set time
timezone123456 XX
(XX = hours ahead of GMT)
time ok
Request location
& status
g123456# Google http link + status
Google map request 123 GPS: http link
Change password
(affects texts, not login)
pwd123456,XXXXXX
Must be 6 digit
OK ! New password: 123456
Keep safe !
Reporting interval moving
- engine on
run,30 or upload123456
30
OK! acc on GPRS Reptime: 30s
Reporting interval
stationary – engine on
stop,180
OK! acc off GPRS Retime: 180s
Alarm Arm
Disarm
111
000
GSM:5 Power:6 Arm delay on 0s
GSM:4 Power:6 DISARMED