LED indication Description
All RED LED’s are ON, and gradual-
ly pulsing brighter and dimmer.
Device is currently in Default/Factory
Settings or was successfully reset to
default.
LED’s VERY QUICKLY flash RED
sequentially in a clockwise motion one
at a time.
Motion is being detected by the device.
It will display this LED indication wheth-
er the device is in alarm mode or not, as
long as there is movement detected.
1-4 LED’s gradually pulse RED, the
number of LED’s ON indicates bat-
tery charge level
Cycloop battery is charging.
1 light is pulsing
then 25% battery charged
2 lights pulsing
then 50% battery charged
3 lights pulsing
then 75% battery charged
4 lights are SOLID ON
indicates 100% battery is fully charged.
1 BLUE LED is blinking
Device is registering to the cellular
network.
All RED LED’s and 1 BLUE LED (on
the side with little lock symbol) will
briefly flash at the SAME TIME once
every 3 seconds.
Device Firmware Update (DFU Mode)
if you see this indication then please
contact our Customer Support using an
in-App message or via email to sup-
port@cyclooptracker.com
LED
INDICATIONS
To Next Page
Loading...
