Charging your Cycloop’s Battery for the first time.
Get a USB-C charging cable
and adapter (not provided
with Cycloop)
Find the USB-C charging port
located under the waterproof
rubber covering (you will need to
lift up the rubber)
Remove Cycloop from the
packaging and take the larger part
of cycloop which has the 2 ‘X’ LED’s
Plug your USB-C charging cable
into the charging port. LED’s will
pulse RED, the number of LED’s
determines battery charge (1=25%,
2=50%, 3=75%, 4=100%)
1
3
2
4
GETTING
STARTED
STEP 1
To Next Page
Loading...
