INSTALLATION SAFETY
• Cycloop needs a minimum clearance distance of 45mm between the seat tube and any other bicycle
parts especially the tire.
• Check clearance distance by sliding Cycloop along all positions on the tube making sure it doesn’t
come into contact with any other parts
• You can also try to turn Cycloop so the electronics side of the device faces away from the tire/other
parts.
• Make sure Cycloop is properly secured to the tube, prevent it from coming loose and sliding on the
tube.
• Make sure no wires are on the tube you attach Cycloop to, otherwise it will not be properly secured.
• If minimum clearance distance is not met and Cycloop comes loose and slides into the tire, it can
cause an accident.
• Be very careful attaching Cycloop to a Carbon bike frame, it can damage the frame if too much
pressure is applied.
CE or FCC related Radiofrequency radiation exposure information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator and
the body of the user or nearby persons. Make sure the device is more than 20cm away from a person‘s
body.
WARRANTY PROCEDURES
To obtain warranty service, you may return a defective system to your original point of purchase, or the
authorized “Monimoto UAB” dealer or the distributor from which you purchased the Cycloop product.
In order to request warranty service, the purchaser is required to provide proof of purchase.
MANUFACTURER WARRANTY
“Monimoto UAB” warrants this system only to the original purchaser and only in case of defective
workmanship and materials under normal use of the system for a period of twenty four (24) months
from the date of shipment by the “Monimoto UAB” (Warranty Period). Warranty obligations do not
cover expendable materials (power elements and/or batteries), holders and enclosures. The warranty
remains valid only if the system is used as intended, following all guidelines outlined in this manual
and in according to the operating conditions specified. The warranty is void if the system has been
disassembled or exposed to mechanical impact, chemicals, high humidity, fluids, corrosive and hazardous
environments or force majeure factors.
To Next Page
Loading...
