EasyManuals Logo

Monitor Audio ASW100 User Manual

Monitor Audio ASW100
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
5
© Monitor Audio Ltd 2001
Mains Connection
Important
Check the voltage setting. Do not connect the appliance to an incorrect power
supply, as serious damage may occur. Do not connect the power supply until all
other connections have been made.
Position/Location
Your Monitor Audio Subwoofer should perform well in just about any room location.
In fact unless your ear is within a couple of feet of the subwoofer, the bass should
seem to radiate from your main speakers.
Your Monitor Audio Subwoofer is not magnetically shielded and therefore should
not be located too close to your television set, leave a distance of at least 2-3 feet.
Failure to do so will result in your television set’s tube becoming magnetised and
this will cause a distortion of the picture, together with a change of colour. Should
this occur, consult your Television service agent for advice.
No matter where you place your subwoofer, you must allow sufficient spacing for
ventilation of the rear panel. The rear panel has a heat sink mounted onto it and will
therefore generate heat, when in use.
Do Not
a Place your subwoofer directly against a wall, leave at least a minimum of 15cm
(6 inches) and preferably 30cm (12 inches).
b Place against a radiator, panel heater or forced air heating outlet
c Place outdoors or in a humid environment
d Plug into an AC mains outlet until all your system wiring is completed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Monitor Audio ASW100 and is the answer not in the manual?

Monitor Audio ASW100 Specifications

General IconGeneral
BrandMonitor Audio
ModelASW100
CategorySubwoofer
LanguageEnglish

Related product manuals