EasyManuals Logo

Monitor Audio Silver 1 User Manual

Monitor Audio Silver 1
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Setting Up
AV Positioning
The illustrations on the following pages show optimal positioning and some suggested room
layouts for AV applications. For advice on configuring a 2 channel system, refer to page 7.
The front, and in some cases rear, floor standing and stand mount speakers should be
positioned approx 6 - 9 feet apart (1.8m - 2.5m) and start with them about 10 inches
(25cm) from the wall.
If, when playing music, the sound is too bass heavy or there is bass boom from the room,
then move them slightly further away from the rear/ side walls. If this is not possible, then
try the supplied port bungs (not included in the Silver FX or Centre). Refer to Page 11.
The Centre should be positioned so that it is pointing at you in your viewing position, and
at approximate ear height. If it is below or above ear height, use some rubber feet (small
feet supplied) to angle it slightly.
The FX’s should be positioned in accordance with the below illustrations and approx 2
feet (60cm) above ear height when in your listening position. Refer to page 7 for further
information.
Optimum AV Speaker Positioning
22°
30°
90°
110°
135°
150°
Centre
Left
Right
Surround
Right
Surround
Left
Rear
Surround Left
Rear
Surround Right
Silver Series4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Monitor Audio Silver 1 and is the answer not in the manual?

Monitor Audio Silver 1 Specifications

General IconGeneral
Bass reflexYes
Product colorBlack
Housing materialWood
Recommended usageUniversal
Suitable for outdoor useNo
Woofer-
Speaker type2-way
Tweeter diameter25 mm
Number of drivers2
Speaker placementTabletop/bookshelf
Audio output channels1.0 channels
Driver diaphragm materialAluminum
Number of tweeter drivers1
Tweeter diameter (imperial)1 \
Mid-range driver diameter (imperial)6 \
Recommended amplifier power (max)100 W
Recommended amplifier power (min)40 W
Impedance8 Ω
Sensitivity87 dB
Frequency range45 - 35000 Hz
Crossover frequency3000 Hz
Finish typeHigh-gloss
Connectivity technologyWired
Weight and Dimensions IconWeight and Dimensions
Depth275 mm
Width185 mm
Height312 mm
Weight6950 g

Related product manuals