Monka mcHF - 3.4 Macro

3.4 Macro
With skillful use，Users need to be given a lot of tedious
and type of input and simplify operations, this time you need
to use a macro 。 Through a series of macro includes a
switching transmitting/receiving, content input and other
operations defined on the F1 ~ F10, when using only need to
enter F1 ~ F10 machine will perform a series of actions that
you set in advance。
1) Record my callsign to Macro: Ctrl+M BG5XXX Ctrl+Z
2) Edit a standard call macro:
Ctrl+F1 Ctrl+S cq cq cq de Alt-M Alt-M pse k Ctrl+Q Ctrl+Z
Save a macro to F1，Press F1 execute the macro
Displays: Tx, cq cq cq de BG5XXX BG5XXX psk k
Displays: Tx, cq cq cq de BG5XXX BG5XXX psk k
Ctrl+F1: save macro to F1 key，
Ctrl+S : PTT ON Alt-M: Put callsign mark to macro
Ctrl+Q: PTT OFF Ctrl+Z:
Report your callsign three times, just in case of error.
Commonly used macro：
Record call to flash: Record others call to
RAM(volatile)
Ctrl+M BG5XXX Ctrl+Z Ctrl+T DX1XXX Ctrl+Z
Macro for call (F1) ：
Ctrl+F1 Ctrl+S cq cq cq de Alt+M Alt+M Alt+M pse k Ctrl+Q Ctrl+Z
(Triple times ALT+M for call sign, just in case for error)
Macro for reply (F2) ：
Ctrl+F2 Ctrl+S Alt+T Alt+T Alt+T de Alt+M Alt+M Alt+M pse k Ctrl+Q Ctrl+Z
Waiting for reply……
Exchange info (F4) ：
Ctrl+F4 Ctrl+S NAME:XXX 817ND ANT:DP PWR:5W
QTH:FUZHOU,CHINA Ctrl+Q Ctrl+Z
Waiting for reply……
Fare ware macro (F5)
第 11 页