Mono Bx Series User Manual

Eco Convection Ovens | 4/5/7/10-Tray | Steam Installation and Operation Manual
10
MONO FG1BX-UK-MAN-0100 | Rev. A23 (March 2023)
Electrical specifications
Power supply
WARNING  An electrical socket must be protected by a 30mA Type A Residual Current Device
(RCD) before installation and commissioning of the oven.
 Always fit a wall-mounted isolator switch to isolate the oven from the electrical supply
completely. The isolator must be visible, labelled clearly, and easily accessible by an
operator.
 Always check electrical requirements on the nameplate before connecting the power.
Table 2: Oven supply specifications
4/5-Tray 240 Vac (50 Hz), 1 phase 7.5 kW, 40 Amps
380 Vac (50 Hz), 3 phase + neutral + earth (Contact the factory)
415 Vac (50 Hz), 3 phase + neutral + earth 7.5 kW, 11 Amps per phase
7-Tray 240 Vac (50 Hz), 1 phase 10 kW, 45 Amps
380 Vac (50 Hz), 3 phase + neutral + earth (Contact the factory)
415 Vac (50 Hz), 3 phase + neutral + earth 10 kW, 14 Amps per phase
10-Tray 380 Vac (50 Hz), 3 phase + neutral + earth (Contact the factory)
415 Vac (50 Hz), 3 phase + neutral + earth 17 kW, 32 Amps
Power cable
 2.5 metres of cable factory-fitted with a LEGRAND (or equivalent) plug
Display
 7-inch HD TFT resistive touchscreen, portrait format
Environmental specifications
Table 3: Environmental specifications
Noise level Less than 85 dB
Water supply Required
Drainage Not required

Mono Bx Series Specifications

General

Brand	Mono
Model	Bx Series
Category	Oven
Language	English