Eco Convection Ovens | 4/5/7/10-Tray | Steam Installation and Operation Manual
18
MONO FG1BX-UK-MAN-0100 | Rev. A23 (March 2023)
4. Touch the Program panel.
5. Select the program required.
(a) Keeping a finger touching the screen, slide the finger up and down to scroll through the list.
(b) Touch a program name (e.g., Program03) to highlight it.
(c) Touch the Tick () button to confirm the program choice.
Note
Touching the Home button at any time returns the display to show the main screen.
7. Touch the Start button (A).
8. Wait while the oven heats up to the programmed temperature.
(a) The Temperature and Start buttons flash during this waiting phase.
(b) When the oven is at the correct temperature, a series of beep-beep sounds are heard.
The Temperature button stops flashing.
Note
If the oven is too warm, the Temperature button turns blue and flashes. Open the door to help to
cool. When the oven is at the correct temperature, a series of beep-beep sounds are heard.
Close the door to maintain temperature until ready for the next step.
To Next Page
Loading...
Need help?
General
