Monsoon Multimedia HAVA Titanium User Manual

10-2007
Page 1 of 7
Quick Start Guide
Step 1 HAVA Titanium Setup
UNPACK: Check that your package includes the following.
HAVA Titanium Unit 2 Composite A/V Cable
Power Supply IR Blaster Cable Hava Software CD
2 Component Cables USB Dongle this Quick-Start Guide.

Monsoon Multimedia HAVA Titanium Specifications

General

Video Input	Composite, S-Video, Component
Network Connectivity	Ethernet
Remote Control	Yes
Video Formats	MPEG-2, MPEG-4
Weight	1.5 lbs
Video Output	Composite
Audio Input	Stereo Audio (L/R)
Audio Output	Stereo Audio (L/R)
Supported Resolutions	720p, 1080i
Interface	USB
Audio Formats	MP3

Summary

Step 1 HAVA Titanium Setup

UNPACK

Check that your package includes all listed items for HAVA Titanium.

TESTING YOUR POWER SUPPLY

Connect the HAVA unit's power supply and observe the power LED illumination.

CONNECT USB DONGLE

Connect the USB Dongle to either USB port on the back panel of HAVA Titanium.

Step 2 Connect to your Video signal

COMPONENT CABLE CONNECTION

Connects the HAVA unit to a video source using component cables.

COMPOSITE CABLE CONNECTION

Connects the HAVA unit to a video source using composite cables.

S-VIDEO CONNECTION

Connects the HAVA unit to a video source using an S-Video cable.

Step 3 Connect the Infrared (IR) Blaster Cable

CONNECTING TO YOUR HAVA

Connects the IR blaster cable to the IR blaster port on the back of HAVA.

IR Blaster Cable Connection

Positions the IR emitter to face the IR sensor on the target video device.

Step 4 Install HAVA Software

INSTALL THE SOFTWARE

Install the HAVA software by inserting the CD and running the setup wizard.