05
EN
Signal line connection
Audio output
USB Upgrade
Connect the signal line to output interfaces signal of DP/HDMI signals of PC,
and then connect the other end of the signal line to the corresponding signal
input port of the display.
This machine supports earphone and external speaker audio output.
The USB port is used only for USB devices to update the monitor firmware.
Do not insert any other equipment.
* The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
Freesync Supported and G-Sync Compatible
To Next Page
Loading...
Need help?
General
