3
GETTING STARTED
Before first use: Charge the unit for 7 hours.
While charging, the RED LED indicator will flash slowly.
When the unit is fully charged, the RED LED indicator will turn ON.
When the battery is low, the RED LED indicator will flash rapidly.
Press the Power button to turn the speaker ON
(RED LED will turn on, and voice confirmation).
Speaker will enter Bluetooth pairing mode(BLUE LED will fash).
●
●
●
●
●
●
Charging Battery :
Make sure Bluetooth function is enabled on your device.
Place Bluetooth device and speaker within pairing distance (~3 ft.).
Press and hold Bluetooth button for 3
seconds to enter pairing mode
(BLUE LED will fast flash).
Search for Bluetooth connections on
your device. Select “Monster LUNA”.
Speaker will confirm connection with
audible sound (BLUE LED turns solid).
●
●
●
●
●
Bluetooth Connection :
SPECIFICATIONS
● Function
● Broadcast range
● Water resistance
● APP
● Battery
● Battery Life
● Power Input
● Speaker output
● Driver
● THD + Noise
● S/N
● Handlamp Power
● Handlamp input
● Handlamp Battery
● Product Dimension
● Net Weight
● Gross weight
BT & lighting & apps
30m
IPX5
EZ PLAY 2
11.1V / 2200mAh
Estimated>10 hours active use under 60% volume
Type-C 5V / 3A
10W * 2
2.75'' *2
< 10%
> 70dB
3W
5V(2pin POGO PIN)
2200mAh *2(One battery per lamp)
15.07"*59.05"*55.5" (H x W X D)
2.3lbs
2.7lbs
General :
Power LED
(RED)
ON
OFF
Solid
Slow Flash
Will stay on for 3s then turn o
Unit in Standby mode
LED Status Indicators :
Charging LED
(RED)
Fully charged
Charging in progress
Solid
Fast Flash
Bluetooth LED
(Blue)
Unit is connected with BT device
Unit is in BT pairing mode
Solid
Fast Flash
EZ PLAY 2 LED
(Orange/White)
EZ PLAY 2 Speakers connected
Scan Transmit unit signal / send signal
to receive unit (connection request)
<25%
25%
50%
75%
100%
Battery LED
(Green)
indicator will flash rapidly
One indicator lights
Two indicator lights
Three indicator lights
Four indicator lights
To Next Page
Loading...
