EasyManua.ls Logo

Montigo DelRay DRL7213NI - User Manual

Montigo DelRay DRL7213NI
70 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
XG0226 - 042220
Installation & Maintenance Manual
®
C
US
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious injury,
death, or property damage.
—Donotstoreorusegasolineorotherammablevaporsand
liquidsinthevicinityofthisoranyotherappliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phoneinyourbuilding.
• Leavethebuildingimmediately.
• Immediatelycallyourgassupplierfromaneighbour's
phone. Follow the gas supplier’s instructions.
• Ifyoucannotreachyourgassupplier,callthere
department.
—Installationandservicemustbeperformedbyaqualied
installer,serviceagencyorthegastter.
DelRay INDOOR DIRECT VENT GAS FIREPLACE
DRL3613NI 16,000 BTU/hr Natural Gas or Propane Gas
DRL3613NI-2 16,000 BTU/hr Natural Gas or Propane Gas
DRL4813NI 21,000 BTU NG /19,000 BTU Propane /hr
DRL4813NI-2 21,000 BTU NG /19,000 BTU Propane /hr
DRL6013NI 28,000 BTU NG /25,000 BTU Propane /hr
DRL6013NI-2 28,000 BTU NG /25,000 BTU Propane /hr
DRL7213NI 35,500 BTU NG /32,000 BTU Propane /hr
DRL7213NI-2 35,500 BTU NG /32,000 BTU Propane /hr
A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and must be installed for the protection
of children and other at-risk individuals.
HOT GLASS WILL CAUSE BURNS.
DO NOT TOUCH GLASS UNTIL
COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
Installation and service must be performed by a qualied installer,
service agency or the gas tter. Check local codes and read all
instructions prior to installation.
Some materials used in the manufacturing process of this product can
expose you to Benzene which is known in the State of California to
cause cancer and birth defects or other reproductive harm. For more
information go to www.P65warnings.ca.gov
WARNING
Installer: Leave this manual with the appliance. Please refer to the
Montigo website for the most current version of the replace manual
Consumer: Retain this manual for future reference. Please refer to the
Montigo website for the most current version of the replace manual
NOTICE
SCAN THE QR CODE OR VISIT THE
WEBSITE TO VIEW THE MOST RECENT
VERSION OF THE MANUAL
WWW.MONTIGO.COM/PRODUCT-GUIDES
IMPORTANTIMPORTANT

Table of Contents

Questions and Answers

  • L
    Lisa BlackAug 10, 2025
    Why won't my Montigo Indoor Fireplace pilot igniter spark?
    • S
      Sarah ToddAug 10, 2025
      If the pilot igniter won't spark, here are a few things to check: 1. Make sure the MAIN ON-OFF switch (typically located below the valve cover) is turned ON. 2. Ensure the main power is ON or that new batteries are installed in the remote control and backup battery pack (if available). 3. Check the 3.15A fuse in the control box and replace it if necessary.
  • B
    bridgesamberAug 14, 2025
    What to do if the pilot igniter is sparking, but the pilot burner will not light on my Montigo DelRay DRL7213NI Indoor Fireplace?
    • B
      Brenda DavisAug 14, 2025
      If the pilot igniter is sparking, but the pilot burner won't light, you can try the following: 1. Verify the Inlet and Manifold Gas Pressure are within acceptable limits. 2. Check all connections to the gas valve. 3. Check the connection to the stepper motor (if available).
  • L
    Laura HurstAug 19, 2025
    How to fix a Montigo DelRay DRL7213NI Indoor Fireplace when the pilot light is on, but the main burner will not light?
    • S
      Sarah CortezAug 19, 2025
      If the pilot light is on, but the main burner won't light, try these steps: 1. Check and verify all wiring connections according to the wiring diagram. 2. Verify that the inlet and Manifold Pressure are within acceptable limits.
  • M
    Michael YoungAug 25, 2025
    What to do if pilot lights, but main burner will not light and igniter continues to spark in my Montigo Indoor Fireplace?
    • R
      Randy WallAug 26, 2025
      If the pilot light is on, but the main burner won't light and the igniter continues to spark, try the following: * Clean the Pilot Flame Sensor Rod with steel wool. * Clean the Pilot hood with steel wool if it's dirty. * Adjust the pilot flame using the pilot adjustment screw to ensure it fully engulfs the sensor rod and is stable. * Ensure the ground wire from the pilot is connected to the fireplace body.
  • D
    darlenegarciaAug 29, 2025
    What to do if pilot lights, but main burner will not light in my Montigo Indoor Fireplace?
    • R
      Ricky NealAug 29, 2025
      If the pilot light is on, but the main burner of your Montigo Indoor Fireplace won't light, check and verify all wiring connections according to the wiring diagram and verify that the inlet and manifold pressure are within acceptable limits.
  • B
    Billy SimsSep 4, 2025
    What to do if Montigo Indoor Fireplace pilot igniter is sparking, but pilot burner will not light?
    • M
      Michael LawrenceSep 4, 2025
      If the pilot igniter is sparking, but the pilot burner won't light on your Montigo Indoor Fireplace, verify the Inlet and Manifold Gas Pressure are within acceptable limits. Also, check all connections to the gas valve and the connection to the stepper motor (if available).

Montigo DelRay DRL7213NI Specifications

General IconGeneral
TypeIndoor Fireplace
ModelDRL7213NI
Fuel TypeNatural Gas or Propane
IgnitionElectronic Ignition
VentingDirect Vent
WarrantyLimited Lifetime Warranty
BurnerLinear
FinishBlack

Related product manuals