EasyManua.ls Logo

Montigo M38BV-ST - User Manual

Montigo M38BV-ST
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
See-Thru
B-Vented
Gas Fireplace
M38BV-
Installation
Operation &
Maintenance
Warning:
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage. Refer to
this manual. For assistance or additional
information consult a qualied installer,
service agency or the gas supplier.
What To Do If You Smell Gas:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
If you cannot reach your gas supplier, call the re department.
For Your Safety:
Do not store or use
gasoline or other ammable
vapors and liquids in the
vicinity of this or any other
appliance.
Safety Notice:
Glass doors on gas replaces are
extremely hot while the replaces is on
and remain hot even after the replace
has been turned off. Safety screens
are available and can reduce the risks
of severe burns. Please keep children
away from the replace at all times.
®
C US
Installer: Leave this manual
with the appliance.
Consumer: Leave this man-
ual for future reference.
Check local codes and read all
instructions prior to installation.

Questions and Answers

  • F
    Faith ColemanAug 12, 2025
    What to do if the main burner on my Montigo M38BV-ST Indoor Fireplace will not light?
    • K
      Kelsey BakerAug 12, 2025
      If the main burner of your Montigo Indoor Fireplace doesn't light, first check the wiring as shown in figure 10. Then, verify that the wall switch has a proper connection.
  • C
    Christopher LittleAug 21, 2025
    What to do if the pilot won’t ignite on my Montigo M38BV-ST Indoor Fireplace?
    • S
      Sheila ValenciaAug 21, 2025
      If the pilot light on your Montigo Indoor Fireplace won't ignite, disconnect the remote wires and try to light the pilot again. If it works now, the remote connections are faulty.
  • D
    Danielle JohnsonAug 31, 2025
    How to fix a noisy pilot flame in my Montigo Indoor Fireplace?
    • S
      schmidtamandaAug 31, 2025
      To fix a noisy pilot flame in your Montigo Indoor Fireplace, locate the Pilot Adjustment Screw and turn the adjustment screw clockwise to decrease the flame.

Montigo M38BV-ST Specifications

General IconGeneral
BrandMontigo
ModelM38BV-ST
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals