Montigo Proflame 2 User Manual

®
C US
XG0677 141231
Proame 2
System
Operation & Maintenance Manual
Read these instructions before use.
NOTICE
FIRE HAZARD. Can cause severe injury or death. The Transmitter and IFC
.
WARNING
device causes ignition of the appliance. The appliance can turn on suddenly.
Keep away from the appliance burner when operating the remote system or
activating manual bypass of the remote system.
Property Damage Hazard. Excessive heat can cause property damage.
The appliance can stay lit for many hours. Turn off the appliance if it is not going
be attended for any length of time.
.
CAUTION
- Turn OFF the main gas supply of the appliance during installation or
maintenance of the receiver device.
- Turn OFF main gas supply to the appliance prior to removing ro reinserting the
batteries.
- In case of remote control malfunction turn OFF the IFC device using the On/Off
main switch.
- For installation / maintenance switch OFF the IFC device by removing main
power supply plug and disconnect.
ATTENTION
Do not operate in presence of water dripping, spraying, rain, etc.
WARNING
Canadian Heating Products Inc. Langley, BC V4W 4A1 | Montigo Del Ray Corp. Ferndale, WA 98248
WARNING
When installing the replace - gas lines, ttings,
accessories or any other objects cannot impede the
proper movement of the door buckles.

Montigo Proflame 2 Specifications

General

Brand	Montigo
Model	Proflame 2
Category	Indoor Fireplace
Language	English

Summary

Operation

Initializing the System

Steps for installing batteries and connecting power for initial system setup.

First-Time System Operation

Procedure for synchronizing the control module with the remote control.

Temperature Display Settings

How to display Fahrenheit or Celsius temperature on the remote control.

Turning Fireplace On and Off

Instructions for turning the fireplace on and off using the remote control.

Flame Level Adjustment

How to adjust the fireplace flame height using the remote's arrow keys.

Room Thermostat Control

Using the remote to set a desired temperature for room comfort control.

Smart Thermostat Function

Activating Smart Thermostat to adjust flame based on room temperature.

Fan Speed Management

Controlling the fireplace fan speed through the remote control.

Accent Light Operation

Operating the fireplace accent lights using the remote's auxiliary function.

Continuous Pilot Ignition

Enabling continuous pilot for cold climates or preventing condensation.

Remote Control Key Lock

Locking/unlocking remote control keys to prevent unsupervised operation.

Maintenance and Troubleshooting

Low Battery Power Indicators

Identifying low battery status on the remote control and control module.

Control Module Battery Alerts

Alerts for low battery in the control module and required actions.

Notes