Montigo Proflame 2 - Operation

Page 2
Proame 2 Transmitter
XG0677 - 141231
Operation
The Proflame Transmitter 2 is an integrated part of the Proflame 2 System,
which consists of these elements:
- Proflame 2 Transmitter, to be used in conjunction with:
- Integrated Fireplaces Control (Proflame 2 IFC)
IMPORTANT
The Proame 2 Transmitter controls the
following replace functions:
1. Main Burner On/Off
2. Main Burner ame modulation (6 levels).
3. Choice of standing or intermittent pilot (CPI/IPI).
4. Thermostat and Smart thermostat functions.
5. Accent light On/Off.
6. Comfort fan speed modulation (6 levels).
The Proame 2 Transmitter uses a streamline design with
a simple button layout and informative LCD display, see
gure 1. A Mode Key is provided to index between the
features and a Thermostat Key is used to turn On/Off or
index through Thermostat functions, see gure 1 & 3.
Additionally, a Key Lock feature is provided, see gure 15.
The Proame 2 System consists of the
following elements:
1. Pilot Assembly
2. Proame Gas Valve.
3. Proame 2 Control Module
4. Wiring Harness
5. Variable Speed comfort fan *
6. Accent Lights *
7. Proame 2 remote control
8. Battery Pack (not applicable for power vented units)
9 Manual override switch
.
WARNING
Do not expose remote control to temperatures below 0°C (32°F) or above 50°C (122°F)
* Not available on all replace models. Refer to the
replace instruction guide for available features.