Check all the parts for signs of wear. Do not continue to use the product if you find any defects.
Parts should only be replaced with original spare parts, and by a specialist, in accordance with the
manufacturer’s specifications. A lack of care and maintenance can damage the appliance.
Dangerous situations can arise. To ensure electrical safety, the appliance must not be subjected
to liquids or be immersed in them. Regular maintenance helps to ensure the safety of the product
and increases its service life.
Warning: Allow the heater to cool down completely before cleaning or storage!
Cleaning
Clean the ventilation grilles regularly with a soft brush or by vacuuming. If necessary, wipe the
housing with a soft dry cloth. Use a slightly dampened cloth to remove more substantial dirt. Do
not use cleaners or detergents containing solvents; substances such as bleach can damage the
product.
Storage
If the heater is not used for a longer period of time, it should be protected from dust and stored
in a clean, dry place.
8.0 TROUBLESHOOTING
Do not operate any larger consumers
(kettle, coffee machines, etc.) on the
same circuit simultaneously
After a cool-down period (approx. 30
minutes), the heater is ready for use
again.
10.0 DISPOSAL
At the end of your item’s long service life, please dispose of the valuable raw materials properly
so that proper recycling can take place. If you are not sure how best to proceed, the local waste
disposal companies or recycling centres will be happy to help.
To Next Page
Loading...
General