Moog Little Phatty Stage II Edition - Page 6

Page 8
LP Stage II User’s Manual - The Basics
Page 9
LP Stage II User’s Manual - The Basics
Front Panel (con’t):
6. The Output section - includes controls for adjusting the Master Volume, a switch to toggle the output
on and off, and a headphone jack. The Master Volume is used for setting the levels of both the output
and the headphones. The Output On/Off switch affects the Audio Output, but not the headphones.
Side Panel:
The side panel provides connections for Power, MIDI, Control Voltage Input and Audio I/O:
1. Power Socket and Switch – provides power to the LP. Power is ON when the switch is in the up
position.
2. Audio jacks – provides monophonic audio input and audio output connections. The Audio Input jack
allows external signals to be processed by the Little Phatty.
3. Control Voltage jacks – provides Control Voltage/Expression Pedal inputs for Pitch, Filter, and Volume
parameters, and a keyboard Gate input to trigger the envelope generators with a footswitch or gate
signal. These inputs allow the LP to be controlled from expression pedals, or CV devices like the
Moogerfooger® CP-251 Control Processor.
4. MIDI – provides MIDI Input/Output to other MIDI devices through either MIDI DIN or USB
connections (software selectable).