Moog Voyager - Page 42

42
+/- Fifth
+/- 1 Octave
+/- 1 Octave & 5
th
+/- 2 Octaves
+/- 2 Octaves & 5
th
PGM M-WHL SOURCE
PROGRAMMABLE MOD WHEEL SOURCE is a function that allows the user to program 1
of 8 additional modulation sources to be used when the SOURCE switch for the Mod
Wheel Mod Bus is set to NOISE/PGM. Enter EDIT mode, and use the +1 button to
highlight PGM M-WHL SOURCE. Press ENTER and the following Mod Sources appear:
Noise (default)
Filter ENV
Amplitude ENV
Smoothed Sample and Hold
Oscillator 1
Oscillator 2
Touch Surface X
Touch Surface Y
PGM M-WHL DEST.
PROGRAMMABLE MOD WHEEL DESTINATION is a function that allows the user to
program 1 of 8 additional modulation destinations to be used when the DESTINATION
switch for the Mod Wheel Mod Bus is set to LFO RATE/PGM. Enter EDIT mode, and use
the +1 button to highlight PGM M-WHL DEST. Press ENTER and the following Mod
Destinations appear:
LFO Rate (default)
Filter Resonance
Filter Spacing
Panorama
Osc. 1 Level
Osc. 2 Level
Osc. 3 Level
Noise Level
PGM PEDAL SOURCE
PROGRAMMABLE PEDAL/ON SOURCE is a function that allows the user to program 1 of
8 additional modulation sources to be used when the SOURCE switch for the Pedal/On
Mod Bus is set to NOISE/PGM. Enter EDIT mode, and use the +1 button to highlight PGM
PEDAL SOURCE. Press ENTER and the following Mod Sources appear:
Noise (default)
Filter ENV
Amplitude ENV
Smoothed Sample and Hold
Oscillator 1
Oscillator 2
Touch Surface X
Touch Surface Y
PGM PEDAL DEST.
PROGRAMMABLE PEDAL/ON DESTINATION is a function that allows the user to program
1 of 8 additional modulation destinations to be used when the DESTINATION switch for