7
User Manual
Motor Connect
HEIGHT
It is essential that the baby hammock or cradle does not touch the floor
during operation. Before using your product, perform these two tests to
ensure that it does not touch the floor.
FIRST TEST: EMPTY BABY HAMMOCK
Mount the baby hammock or cradle as instructed and manually stretch
the spring as much as you can. Pull on the spring until you feel the safety
strap (the nylon strap inside the spring) preventing any further expansion.
When the spring is fully extended, space must remain between the
bottom of the baby hammock or cradle and the floor.
SECOND TEST: CHILD IN THE BABY HAMMOCK
Now place the child in the baby hammock or cradle and repeat the test
described above: Stretch out the spring until you feel the safety strap
keeping it from stretching further.
Here, too, space must remain between the bottom of the baby hammock
or cradle and the floor.
Please note
When using the Motor Connect with
a baby hammock and a door frame
clamp from Moonboon, ensure that
there is a minimum of 220 cm (7 feet
and 3 inches) of space between the
door frame and the floor.
Please note
Perform the tests regularly as your
child grows and becomes heavier.
This way you ensures that the baby
hammock or cradle never touches
the floor.
To Next Page