4. Operation List
4.1 Video/Photo Playback
(1) Switch the power switch to “ON”, Press “OK” once to enter test mode. When the logo screen
changes to the test screen, press ↑ arrow button to enter playback. Press ← and → for
selection, “OK” to play video.
(2) Press button ↑ again to exit.
4.2 Delete
(1) In playback mode (4.1) Press “M” button to delete files, or format SD card. Press “M” again
to exit.
(2) Del one: Delete selected photo/video Press “OK” to choose, press ↑ and ↓ “Yes” to confirm,
“No” to exit to previous page.
(3) Del All: Deletes all photos/videos. Press “OK” to choose, press ↑ and ↓ “Yes” to confirm,
“No” to exit to previous page
4.3 Format SD Card
In playback mode (4.1) to format the SD card via camera.
(1) Press “←” and “→” for selection, “Yes” to confirm, “No” to exit to previous page.
Caution: This will format the SD card to suit camera and all existing data on the card will be
erased.
4.4 Auto switch to PIR mode
In test mode the camera will automatically enter PIR Auto mode if there has been no keypad use
for 60 seconds.
Once it changes to PIR Auto mode you will need to switch power switch off and back on again
for further configuration changes.
Note: The camera will stay in “Test” mode if it is left in the menu configuration pages.
Ensure you exit menu configuration before leaving camera in the field.
To Next Page
Loading...