Morbella TX1 - Exposure

33
© 2017 Ma k a T e c hnologie s G roup . A ll Righ ts Re s er v ed .
Getting Started
Operation of your TX1 F HD Digital Roadcorder
TM
6 Press on OK to confirm your entry and exit to setting
7 Press on button once t o exit Setting and back recording mode
8 Start recording by pressing OK button
9 Stop recording by pressing OK button again
Alternatively, you can choose using the hot keys for shortcuts
Hot Keys during recording mode:
•  Press on button – Press to manual turn off / turn back on when off
mode during recording time.
Exposure
Adjust exposure according to your preference. Default setting is set as +0.0 and
recommended not to change unless changes made on your preference liking.
1 Press OK to stop recording.
2. Press once to enter into video setting
3 Press on Up or Down button to navigate to the function that shows
Exposure
4 Press on OK to enter and show : +0.0/ +1/3 or -1/3 etc
5 Press on the Up or Down button to make your selection
6 Press on OK to confirm your entry and exit to setting
7 Press on button once t o exit Setting and back recording mode
8 Start recording by pressing OK button
9 Stop recording by pressing OK button again