REGULAR INSPECTION B-1
1. IMPORTANCE OF INSPECTIONS
Daily lubrication and inspection by operators and regular inspection by maintenance engineers
are the keys to long-lasting machine accuracy.
Prior to inspection, confirm the following points:
(1) Any abnormality discovered during daily inspections must be reported to maintenance
engineers. If necessary, repair or replacement is to be performed immediately.
(2) Maintenance engineers must take immediate and proper action in compliance with the
instructions of operators who are in charge of daily inspection.
(3) For queries or concerns related to the contents of the instruction manuals, circuit diagrams,
and ladder diagrams, contact Mori Seiki Service Department for assistance.
(4) If the cause of a problem cannot be determined or remedied, contact Mori Seiki Service
Department and/or parts manufacturers for assistance.
<Maintenance/inspection sequence>
For details on checks to be performed, refer to "REGULAR INSPECTION LIST" published
separately.
Daily oil replenishment and inspection by machine operator
Maintenance and repairs by maintenance engineers
Service request call to Mori Seiki and/or parts manufacturer
NOTE
To Next Page
Loading...
Need help?
General
