mori seiki MSG-501 User Manual

B-2 REGULAR INSPECTION
2. CHECKS PRIOR TO MAINTENANCE
(1) Listen to operators in charge of machine operation to understand the problem
accurately.
(2) Study the actual conditions of machine and plan the scope of repair procedures.
(3) Study the specifications, construction, and functions of the part of the machine to
be repaired.
(4) If two or more maintenance technicians or personnel from other sections must
work on the machine, discuss the repair procedure with all personnel in advance
so that everyone can understand the problem accurately.
(5) Prepare spare parts and consumables to be used in advance.
DANGER
(1) Never close the operator door when working inside the machine with
the main power switch ON. When closed, the operator door is
automatically locked and the power supply to servomotors
connected. Rapid machine operations may start unexpectedly.
(2) When working inside the machine with the main power switch ON,
carry the door lock prevention key at all times. Removing the key
prevents the door from closing by mistake.
(3) Ensure that the main power is turned OFF and locked when
connecting the power.
(4) Provide clear warning that the machine is being maintained and
operations cannot be performed.
WARNING
(1) Ensure only parts specified by Mori Seiki are used during parts
replacement. Mori Seiki does not accept responsibility for problems
arising from the use of non-specified parts. Use of non-specified
parts not only impairs machine performance but also leads to unsafe
operating conditions that may result in serious injury or machine
damage.
(2) Wear clothing appropriate to the type of maintenance operation to be
performed.
Approaching the machine with loose clothing may lead to serious
injury due to entanglement in rotating parts or by being crushed by
moving parts.
(3) When two or more persons are working on the machine
simultaneously, awareness of procedures being performed and clear
communication between personnel must be maintained at all times.
Operating the machine or a crane in the surrounding area without
adequate checks to determine if other personnel are working inside or
around the machine may result in serious injury.
CAUTION

mori seiki MSG-501 Specifications

General

Brand	mori seiki
Model	MSG-501
Category	Lathe
Language	English