mori seiki ZL-203 User Manual

OPERATION MANUAL
Applicable Model
ZL-153 ZL-153S
ZL-153MC ZL-153SMC
ZL-203 ZL-203S
ZL-203MC ZL-203SMC
ZL-253 ZL-253S
ZL-253MC ZL-253SMC
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
Applicable NC Unit
MSG-501
OM-ZLFMSG501-A0E

mori seiki ZL-203 Specifications

General

Brand	mori seiki
Model	ZL-203
Category	Lathe
Language	English

Summary

FOR SAFE OPERATION

General Safety Precautions

Essential safety guidelines for machine operation, maintenance, and programming.

Dangers and Warnings

Critical dangers and warnings related to machine operation and potential hazards.

Interlock Functions for Safety

Explanation of interlock functions like door, chuck, and tailstock interlocks for operator safety.

CHAPTER E SETTING OF COORDINATE SYSTEM

Tool Offset Data Setting Procedures

Procedures for setting tool geometry and wear offset data using manual or automatic methods.

Work Coordinate System Setup

Setting work coordinate systems (G54-G59, G50) using data entry or measurement.

Manual In-machine Tool Presetter Operation

CHAPTER F PREPARATION BEFORE STARTING MASS PRODUCTION

Conditions for Starting Automatic Operation

Pre-Production Checks Checklist

Critical checks before mass production, including interlocks, clamping, and settings.

Program Check Procedures

Tool Wear Offset for Test Cutting