Need help?Do you have a question about the Morningstar SUNSAVER DUO and is the answer not in the manual?
General| Type | PWM |
|---|---|
| Input Voltage | 12V / 24V |
| System Voltage | 12V/24V |
| Load Control | Yes |
| Maximum Input Voltage | 30V |
| Battery Voltage | 12V/24V |
| Battery Type | Flooded, Gel |
| Operating Temperature | -40 to +60°C |
| Protections | Short Circuit, Overload, Reverse Polarity |
Provides essential safety guidelines and precautions for handling and installing the solar controller.
Covers crucial precautions and general advice before commencing the installation process.
Explains how to configure the controller's settings using the five DIP switches for battery type and priority.
Outlines wiring procedures for RV/Caravan, Boat, and Non-Mobile installations, including diagrams and notes.
Details how to interpret error codes and common troubleshooting steps for red LED indicators.
To Next Page