To Next PageTo Next Page
Need help?Do you have a question about the Morningstar EcoBoost MPPT EB-MPPT-20 and is the answer not in the manual?
General| Rated Output Current | 20A |
|---|---|
| Efficiency | Up to 98% |
| System Voltage | 12V / 24V |
| Operating Temperature Range | -40°C to +60°C |
| Type | MPPT |
| Maximum PV Input Power | 520W (12V), 1040W (24V), 2080W (48V) |
| Nominal Battery Voltage | 12V |
| Protection | Reverse Polarity, Overload, Short Circuit |
Explains warning, caution, and note symbols and electrical shock risks.
Hazards associated with batteries and safety measures during handling.
Crucial preliminary steps and warnings before installing the controller.
How to set system voltage, battery type, and equalization using DIP switches.
Step-by-step installation procedures including controller limits, RTS, and grounding.
Connecting loads and initial system power-up sequence with LED verification.
Details the 4-stage charging algorithm and related settings/warnings.
Understanding LED status lights for charging, errors, and battery state of charge.
Details firmware update failures, SOLID LED faults, and RE-SETTABLE faults.
Key electrical parameters including voltage, current, and power ratings.
