To Next PageTo Next Page
Need help?Do you have a question about the Morningstar TriStar TS-60 and is the answer not in the manual?
General| Type | PWM |
|---|---|
| Model | TriStar TS-60 |
| Rated Output Current | 60 A |
| Maximum Charge Current | 60 A |
| Maximum Load Current | 60 A |
| Display | LED indicators |
| Maximum Input Voltage | 150V |
| System Voltage | 12/24/48 VDC |
| Nominal Battery Voltage | 12/24/48V |
| Operating Temperature Range | -40°C to 60°C |
| Communication | RS-232 |
| Protection Features | Reverse polarity |
| Maximum System Voltage | 12/24/48 VDC |
General safety advice and precautions for installation and operation.
Specific safety guidelines for installing the TriStar controller.
Compliance with electrical standards and safety regulations.
Detailed steps for mounting, wiring, and connecting components.
Guide to setting up the controller using DIP switches for various functions.
Connecting power wires and powering up the controller.
Understanding controller protections and how to recover from faults.
Explanation of PWM charging method and its benefits.
Overview of 7 standard charging algorithms selectable via DIP switches.
How temperature and voltage sense affect charging parameters.
How the TriStar diverts excess energy to a load.
Critical steps for sizing diversion loads correctly.
Initial steps for troubleshooting common issues with the TriStar.
Common problems and solutions for solar charging.
